^TTEEnd System A664 Rugged (P14 Rear-I/O)

The ^TTEEnd System A664 Core IP Pro Integration Kit helps to avoid the time consuming and costly process of acquiring and integrating hardware and software components from different vendors.

The ^TTEEnd System A664 Pro (FPGA) brings the full power of deterministic Ethernet communication technology to aerospace certifiable hardware.

^TTEEnd System A664 Core IP is a RTCA DO-254 DAL A certifiable solution for avionics systems that allows the transmission of safety-critical data with speeds of up to 1 Gbit/s.

This mezzanine card for network communication combines standard IEEE 802.3 Ethernet with time-triggered capabilities (SAE AS6802) for the development of safety-critical applications.

The ^TTEEnd System A664 Pro (PMC) is certifiable to civil aerospace standards and fully compliant with Ethernet, rate-constrained and time-triggered traffic.

The ^TTEEnd System A664 Pro (XMC) is a DAL A certifiable end system card for use in flight programs, supporting different traffic classes.

This ^TTEEnd System is equipped with three 10/100/1000 Mbit/s Ethernet P14 rear-I/O ports and supports three standard traffic classes.

This high-performance card for development and laboratory environments supports three standard traffic classes and is available in PMC, PCI, XMC and PCIe form factor.

The switch supports laboratory testing and development efforts for non-real-time to hard real-time operations in distributed systems.

The certifiable 10/100/1,000 Mbit/s TTEthernet^® Network Switch Module Core

The ^TTPDevelopment Cluster is a solution for rapid prototyping of modular and distributed integrated systems based on TTP^®.

This prototyping card with stackable on-board modules for microprocessor, communication and physical layer provides flexibility and modularity in prototyping and evaluating.

This development system supporting the ARINC 653 interface is a starter kit for integrating TTEthernet^®’s deterministic network technology with the operating system VxWorks 653.

The ^TTEDevelopment System A664 for Linux provides a starter kit for customers to familiarize themselves with TTEthernet^® products and their integration. TTEthernet enables real-time and non real-time Ethernet communication on the same physical network using different quality-of-service traffic classes.

The ^TTPSimulate PCI is a high-performance test system supporting hardware-in-the-loop simulation and design of complex distributed control systems.

^TTPSimulate is a high-performance test system which enables the simulation of up to 4 TTP^® nodes in real-time, supporting speeds of 4 Mbit/s and 20 Mbit/s.

This standalone TTP^®/Ethernet gateway from TTTech for monitoring and downloads of network data to a TTP network uses an embedded real-time Linux variant.

Basic prototyping module with TTP^® controller and processor hosts for developing deterministic distributed systems.

TTTech Aerospace’s ^TTPVerify enables automatic verification of system and network design parameters and is designed as DO-178B Level A verification tool.

This solution speeds up the verification process of parameter design and changes for ^TTPTD-COM layer and allows lower reconfiguration and certification costs.

^TTPView is a tool for the monitoring and analysis of messages and frames sent among modules in a TTP^® network featuring flexible visualization instruments for reliability.

^TTPBuild from TTTech is an efficient design tool that automatically creates a framework for software application design on one module or control unit.

^TTPLoad downloads application and system configuration data from a PC and sends it to a TTP^® network over an Ethernet/TTP gateway. It also allows quick system reconfiguration.

TTTech’s ^TTPPlan is a cluster design tool for definition and planning of communication in integrated system architectures based on TTP^®.

The ^TTECOM Layer ARINC 653 for controlling ARINC 653 IMA systems offers a powerful interface to applications running on TTEthernet^®-based networks.

This component allows tight synchronization of VxWorks 653 partitions to the fault-tolerant system-wide clock of the TTEthernet^® communication network.

^TTPTD-COM provides communication layer abstraction for hosted applications on top of generic TTP based control system platforms and allows faster time-to-market.

This embedded COTS software library for data transfers over a TTP^® network enables download and upload for large data streams in TTP based systems.

^TTPDriver is a hardware abstraction layer for operations with TTP controllers that facilitates reuse, simplifies code readability and offers various features.

TTTech Aerospace’s system consulting and development experts offer the following consulting services: architecture studies and review, physical layer analysis, and process integration.

TTTech Aerospace offers entry-level courses on deterministic networks, and customized workshops on deterministic embedded system architectures, design tools and methodology for integrated systems with safety-critical and hard real-time functions.

This ready-to-go solution for airborne electronic platforms based on RS-485 is designed for a robust DO-160F, Level 5 physical layer for airborne TTP networks.

This ^TTPController, a standard product from austriamicrosystems, is an integrated device which implements functionalities and features according to SAE AS6003.

The ^TTEAvionics Hosting Unit is a 3U cPCI chassis, specifically designed to meet the challenges of harsh space environments. It is designed, qualified and manufactured by Beyond Gravity.

^TTEDevelopment System Space is based on the ^TTEController HiRel ASICs and provides a full development environment for hard real-time and non-real-time Ethernet communication on the same network using different quality of service traffic classes.

The ^TTEEnd System Space 3U cPCI connects spacecraft subsystems to the TTEthernet^® network via 3x 1000BASE-T/100BASE-TX Ethernet ports supporting triple redundant network architectures.

The ^TTEEnd System Space 3U cPCI interface card connects spacecraft subsystems to the TTEthernet^® network.

The ^TTESwitch Space 3U cPCI forms the core of a TTEthernet^® network for space avionics and allows safe forwarding of traffic on 6x 1000BASE-T and 6x 100BASE-TX full-duplex Ethernet ports.

The ^TTESwitch Space 3U cPCI is a high-performance TTEthernet^® switch designed for the engineering needs during space application development.

The ^TTESwitch Lab Space was specially designed to support laboratory testing efforts of Time-Triggered Ethernet applications in the space industry.

This TTEthernet-based development switch supports 12 Ethernet ports running at a maximum of 1 Gbit/s in full-duplex mode at a processing bandwidth of 24 Gbit/s.

Complementing the existing offering, this monitoring switch supports fast online-mirroring of real-time data going through the operational ports of the switch.

The ^TTESwitch Controller HiRel is an integrated communication controller that supports standard Ethernet, rate-constrained and time-triggered traffic.

The ^TTEEnd System Controller HiRel is an integrated communication controller that supports three traffic classes (SAE AS6802, ARINC 664 part 7 and IEEE 802.3).

The ^TTEEnd System Controller Space provides SAE AS6802, rate-constrained and IEEE 802.3 functions in a radiation-tolerant, highly reliable integrated circuit.

The ^TTESwitch Controller Space provides SAE AS6802, rate-constrained and IEEE 802.3 switch functions in a radiation-tolerant, highly reliable integrated circuit.

Ethernet switch IP core technology demonstrator based on a proven aerospace Ethernet switch IP designed for critical, integrated applications in the aerospace sector.

^TTEVerify is a DO-330 qualified verification tool chain for automating reviews of configuration implementations against their requirements for each level.

^TTEBuild allows converting XML-based device configuration database files into binary configuration images required by ^TTESwitches and ^TTEEnd Systems.

^TTELoad is a Windows application suitable to configure a ^TTEDevelopment Switch based on TTTech's TTEthernet^® switch IP that also supports bootstrap configurations of ^TTESwitches.

^TTEPlan is a TTEthernet^® network design tool. Based on input provided as a system specification XML database, the ^TTEPlan tool creates the network configuration in a user-convenient way.