Product Highlight TTEthernet®
TTESwitch A664 6U VPX Rugged for Aerospace
This robust 16 port 1Gbit/s Deterministic Ethernet switch is a powerful out-of-the-box high-performance solution capable of full-duplex speeds of 10/100/1000 Mbit/s.
TTTech’s 3U VPX TTESwitch is a rugged Ethernet switch designed for building robust and reliable networks in rotorcraft, aircraft and land vehicles.
The 16 port TTESwitch A664 3U VPX Rugged is a powerful out-of-the-box high-performance 3U VPX Ethernet switch capable of full-duplex speeds of up to 1Gbit/s
TTTech’s certifiable TTESwitch A664 A600 pro in the ARINC 600 form factor enables critical network-centric applications in harsh aerospace environments.
This rugged switch for hard real-time data communication is an ultra-light, conduction cooled, high-performance Ethernet switch for robust, reliable networks.
This TTEEnd System is equipped with three 10/100/1000 Mbit/s Ethernet P14 rear-I/O ports and supports three standard traffic classes.
The end system with three 10/100/1000 Mbit/s Ethernet P16 rear-I/O ports uniquely supports three standard traffic classes.
This rugged end system is equipped with two 10/100/1000 Mbit/s Ethernet P14 rear-I/O ports running at full-duplex speeds
The AFDXEnd System Rugged is equipped with two 10/100/1000 Mbit/s Ethernet P16 rear-I/O ports running at full-duplex speeds
This ruggedized deterministic Ethernet network interface card for harsh environments enables hard real-time operation in distributed systems based on Ethernet networks.
The TTEEnd System A664 Production board supports time-triggered and ARINC 664-compliant traffic and offers high-integrity redundancy management.
This TTPController, a standard product from austriamicrosystems, is an integrated device which implements functionalities and features according to SAE AS6003.
The TTPStar Coupler allows building a star architecture with optimized fault-tolerant features, resulting in an architecture with higher availability.
The TTESwitch Controller Space from TTTech providing SAE AS6802, ARINC 664 p7 and IEEE 802.3 switch functions in a radiation-tolerant, highly reliable integrated circuit.
Our TTPDriver is a hardware abstraction layer for operations with TTP controllers that facilitates reuse, simplifies code readability and offers various features.
This embedded COTS software library for data transfers over a TTP network enables download and upload for large data streams in TTP based systems.
The switch supports multi-environment development efforts for hard real-time operations in distributed systems and three different traffic classes.
This TTEthernet-based development switch supports 12 Ethernet ports running at a maximum of 1 Gbit/s in full-duplex mode at a processing bandwidth of 24 Gbit/s.
Complementing the existing offering this monitoring switch supports fast online-mirroring of real-time data going through the operational ports of the switch.
This high-performance card for development and laboratory environments supports three standard traffic classes and is available in PMC, PCI, XMC and PCIe form factor.
This high-performance PMC/XMC card is ideally suited for development and laboratory environments of aircraft networks
This mezzanine card for network communication combines standard IEEE 802.3 Ethernet with time-triggered capabilities (SAE AS6802) for the development of safety-critical applications.
This TTEthernet development system supports the design of high-end systems. It supports a dual channel fault-tolerant system operating at gigabit speed.
This development system supporting the ARINC 653 interface is a starter kit for integrating TTEthernet’s deterministic network technology with the operating system VxWorks 653.
TTPPowernode from TTTech is a basic prototyping module with TTP controller and processor hosts for developing deterministic distributed systems.
This prototyping card with stackable on-board modules for microprocessor, communication and physical provides flexibility and modularity in prototyping and evaluating.
This standalone TTP/Ethernet gateway from TTTech for monitoring and downloads of network data to a TTP network uses an embedded real-time Linux variant.
TTPSimulate is a high-performance test system which enables the simulation of up to 4 TTP nodes in real-time, supporting speeds of 4 Mbit/s and 20 Mbit/s.
The TTPSimulate PCI is a high-performance test system supporting hardware-in-the-loop simulation and design of complex distributed control systems.
This component allows tight synchronization of VxWorks 653 partitions to the fault-tolerant system-wide cycle time of the TTEthernet communication network.
TTEPlan is a TTEthernet/AFDX® network planning tool. Based on input provided as a system specification XML database, the TTEPlan tool creates the network configuration in a user-convenient way.
TTELoad is a Windows application suitable to configure a TTESwitch based on TTTech's TTEthernet switch IP that also supports bootstrap configurations of TTEswitches.
TTEBuild allows converting XML-based device configuration database files into binary configuration images required by the TTESwitches and the TTEEnd Systems.
TTech’s TTPPlan is a cluster design tool for definition and planning of communication in integrated system architectures with the time-triggered protocol TTP.
TTPLoad downloads application and system configuration data from a PC and sends it to a TTP network over an Ethernet/TTP gateway. It also allows quick system reconfiguration.
TTPView is a tool for monitoring and analysis of messages and frames sent among modules in a TTP network featuring flexible visualization instruments for reliability.
TTEVerify is a DO-330 qualified verification tool chain for automating reviews of configuration implementations against their requirements for each level.
This solution speeds up the verification process of parameter design and changes for TTPTD-COM layer and allows lower reconfiguration and certification costs.